Aktisil PF 216 in hydraulic and fuel hoses

Treated with tetrasulfan silane based on Sillitin Z 86

Aktisil PF 216 is applicable specially for sulphur and metal-oxide crosslinking.  
The product offers highest tensile strength, highest tensile modulus, lowest compression set up to 100 °C, best abrasion resistance and best chemical resistance.

  • very good extrusion properties
  • high surface quality
  • high tensile modulus
  • low compression set
  • good resistance against fuels, oil, water, acid
  • avoids deposits on dies caused by filler
Product characteristics Unit AKTISIL PF 216
Basic material SILLITIN Z 86
Silanized with tetrasulfane silane
Brightness Y
Brightness Z
82
77
Particle size D50
Particle size D97
µm
2.2
10.0
Residue > 40 µm
Residue > 200 µm
mg/kg
15
3
Volatile matter at 105 °C % 0.3
Density
Bulk density
g/cm³
2.6
0.25
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
9
60
Water absorption ml/g 0.01
hydrophobic X
reactive X

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

more

More recommended Products

Sorted by crosslinking agent.