Aktisil AM in corrosion protection coatings

Epoxy, aqueous

Amino functionalized based on Sillitin Z 86.

Aktisil AM is applicable in epoxy systems, aqueous and clear coats without corrosion protection pigments.
The product offers improvement of the anti-corrosion properties after salt spray test, especially in high concentrations.

 

  • excellent dispersion properties
  • good rheological properties
  • very low sedimentation
  • low abrasivity
  • fast drying
  • good weathering resistance
  • good corrosion protection, especially reduction of delamination
  • good chemical resistance, especially against acids
  • excellent abrasion resistance
  • potential for reducing the corrosion protection pigment
Product characteristics Unit AKTISIL AM
Functionalization amino
Color values L*
Color values b*
93.8
10.0
Particle size D50
Particle size D97
µm
2.2
10.0
Residue > 40 µm
mg/kg
30
Volatile matter at 105 °C % 0.2
Density
Bulk density
g/cm³
2.6
0.32
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
9
45
Water absorption ml/g not specified
reactive X

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

more

More recommended Products