Mar 9, 2022
mETAL COATINGS
corossion protection coatings
ADVANTAGES OF USING NEUBURG SILICEOUS EARTH
- excellent dispersion properties
- good rheological properties
- very low sedimentation
- low abrasivity
- fast drying
- good weathering resistance
- good corrosion protection
- good chemical resistance, especially against acids
- excellent abrasion resistance
- potential for reducing the corrosion protection pigment
RECOMMENDED PRODUCTS for
GENERAL POLYASPARTIC | EPOXY CONTAINING SOLVENTS | EPOXY AQUEOUS | WATER, DTM SINGLE LAYER | WATER, DISPERSION BASED
Powder coatings
ADVANTAGES OF USING NEUBURG SILICEOUS EARTH
- excellent dispersion properties
- low abrasivity
- good edge covering
- scratch resistance
- abrasion resistance
- flexibility (Erichsen cupping, impact)
- good corrosion protection, especially low delamination and rust creep
- good chemical resistance, especially against hot water
- improved hiding power or partial replacement of titanium dioxide
RECOMMENDED PRODUCTS for
PURE EPOXY (FBE) | POLYESTER/HAA (PRIMID) | HYBRID, POLYESTER/TGIC | UV-CURED
PLASTIC COATINGS
Screen printing inks
ADVANTAGES OF USING NEUBURG SILICEOUS EARTH
- excellent dispersion properites
- good rheological properties
- improved ink transfer
- very good edge definition with high resolution printing
Elastomer Compounds
FKM compounds
ADVANTAGES OF USING NEUBURG SILICEOUS EARTH
- very low sieve residue
- good mixing and dispersion properties
- high tensile strength
- high abrasion resistance
- long flow time with short vulcanization time
- easy deflashing
- low compression set
- good resistance to substances (fuel, oil, water, acid)
- avoidance of mold fouling caused on dies caused by filler
Silicone rubber compounds
ADVANTAGES OF USING NEUBURG SILICEOUS EARTH
- good extrusion properties and collapse resistance
- reduced stickiness
- no blooming
- drier surface
- very good oil resistance
- low tension and compression set without post cure
- partial replacement of ATH with Aktisil Q, Aktifit Q or Silfit Z 91 provides practically the same flame-retardant properties of pure ATH