Bisphenol
Calcined product, alkyl functionalized.
Aktifit PF 111 is applicable specially for bishenolic crosslinking.
The product offers greater elongation at break, better resistance to oil and better compression set according to the VW standard with high filler content.
- very low sieve residue
- good mixing and dispersion properties
- high tensile strength
- high abrasion resistance
- long flow time with short vulcanization time
- easy deflashing
- low compression set
- good resistance to substances (fuel, oil, water, acid)
- avoidance of mold fouling caused on dies caused by filler
| Product characteristics | Unit | Testing method | AKTIFIT PF 111 |
|---|---|---|---|
| Functionalization | alkyl | ||
|
Color values L*
Color values a*
Color values b*
|
acc. to CIELAB |
96.3
- 0.1
1.0
|
|
|
Particle size D50
Particle size D97
|
µm | acc. to ISO 13320-1 |
2.0
10.0
|
|
Residue > 40 µm
|
mg/kg | acc. to DIN EN ISO 787 part 18 |
10
|
| Volatile matter at 105 °C | % | acc. to DIN EN ISO 787 part 2 | 0.2 |
| pH Value | acc. to DIN EN ISO 787 part 9 | not applicable | |
|
Density
Bulk density
Tamped density
|
g/cm³ |
acc. to DIN EN ISO 787 part 10
acc. to DIN ISO 903-1976
acc. to DIN EN ISO 787 part 11
|
2.6
0.30
0.60
|
|
Spec. Surface area (BET)
Oil absorption
|
m²/g
g/100 g
|
acc. to DIN ISO 9277
acc. to DIN EN ISO 787 part 5
|
9
60
|
|
Hardness silica/kaolinite
|
mg |
acc. to Mohs
|
7/4.5
|
| Refractive index n | sin α / sin β | 1.55 | |
|
Water solubility
Acid solubility
|
% |
acc. to DIN EN ISO 787 part 3
acc. to DIN 53770 (0,1 N HCL)
|
not applicable
not applicable
|
|
Chemical Analysis:
SiO2
Al2O3
Fe2O3
|
% | acc. to DIN 51001 (RFA) |
86
13
< 1
|
|
Mineralogical Composition:
Neuburg silica
Calcined kaolinite
|
% | Based on X-ray diffraction pattern analysis combined with Rietveld |
60
40
|
|
Equilibrium moisture content at 25°C
and 50% relative humidity
and 80% relative humidity
and 90% relative humidity
|
% | acc. to DIN 66138 |
0.07
0.10
0.13
|
| Water absorption | ml/g | acc. to Baumann | 0.1 |
| hydrophobic | X |
Bisphenol
- Medium viscosity, low curative level; 80 Shore A; FKM; bisphenol cure (M 629.2/16)
- Medium viscosity, low curative level; 70 Shore A; FKM; bisphenol cure (M 629.2/5)
- Low viscosity, high curative level; 80 Shore A; FKM; bisphenol cure (M 629.3/14)
- Low viscosity, high curative level; 70 Shore A; FKM; bisphenol cure (M 629.3/13)
In order to make available to you the most important information about our products at all times, you will find here the Material Specification.
The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.
All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.
More recommended Products
Sorted by crosslinking agent.