Water and dispersion-based
Calcined product, alkyl functionalized.
Aktifit PF 111 is applicable in water and acrylate dispersion-based primers with active corrosion protection pigments.
The product offers good leveling, good adhesion at non-blasted steel, low water absorption and high resistance to blistering in moisture test.
- excellent dispersion properties
- good rheological properties
- very low sedimentation
- low abrasivity
- fast drying
- good weathering resistance
- good chemical resistance, especially against acids
- excellent abrasion resistance
- high coating flexibility/cupping
- good corrosion protection, especially reduction of delamination
- potential for reducing the corrosion protection pigment
| Product characteristics | Unit | Testing method | AKTIFIT PF 111 |
|---|---|---|---|
| Functionalization | alkyl | ||
|
Color values L*
Color values a*
Color values b*
|
acc. to CIELAB |
96.3
- 0.1
1.0
|
|
|
Particle size D50
Particle size D97
|
µm | acc. to ISO 13320-1 |
2.0
10.0
|
|
Residue > 40 µm
|
mg/kg | acc. to DIN EN ISO 787 part 18 |
10
|
| Volatile matter at 105 °C | % | acc. to DIN EN ISO 787 part 2 | 0.2 |
| Electrical conductivity | µS/cm | acc. to DIN EN ISO 787 part 14 | not applicable |
| pH Value | acc. to DIN EN ISO 787 part 9 | not applicable | |
|
Density
Bulk density
Tamped density
|
g/cm³ |
acc. to DIN EN ISO 787 part 10
acc. to DIN ISO 903-1976
acc. to DIN EN ISO 787 part 11
|
2.6
0.30
0.60
|
|
Spec. Surface area (BET)
Oil absorption
|
m²/g
g/100 g
|
acc. to DIN ISO 9277
acc. to DIN EN ISO 787 part 5
|
9
60
|
|
Hardness silica/kaolinite
|
mg |
acc. to Mohs
|
7/4.5
|
| Refractive index n | sin α / sin β | 1.55 | |
|
Water solubility
Acid solubility
|
% |
acc. to DIN EN ISO 787 part 3
acc. to DIN 53770 (0,1 N HCL)
|
not applicable
not applicable
|
|
Chemical Analysis:
SiO2
Al2O3
Fe2O3
|
% | acc. to DIN 51001 (RFA) |
86
13
< 1
|
|
Mineralogical Composition:
Neuburg silica
Calcined kaolinite
|
% | Based on X-ray diffraction pattern analysis combined with Rietveld |
60
40
|
|
Equilibrium moisture content at 25°C
and 50% relative humidity
and 80% relative humidity
and 90% relative humidity
|
% | acc. to DIN 66138 |
0.07
0.10
0.13
|
| Water absorption | ml/g | acc. to Baumann | 0.1 |
| hydrophobic | X |
In order to make available to you the most important information about our products at all times, you will find here the Material Specification.
The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.
All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.