Aktifit PF 115 in Corrosion Protection Coatings

Water and dispersion-based

Calcined product, amino functionalized.

Aktifit PF 115 offers higher wet and intercoat adhesion, better salt spray resistance, especially at the scratch. It is particularly efficient in applications with low film thickness and single layer. 

 

  • excellent dispersion properties
  • good rheological properties
  • very low sedimentation
  • low abrasivity
  • fast drying
  • good weathering resistance
  • good chemical resistance, especially against acids
  • excellent abrasion resistance
  • high coating flexibility/cupping
  • good corrosion protection, especially reduction of delamination
  • potential for reducing the corrosion protection pigment
Product characteristics Unit AKTIFIT PF 115
Functionalization amino
Color values L*
Color values a*
Color values b*
96.2
- 0.1
1.0
Particle size D50
Particle size D97
µm
2.3
11.0
Residue > 40 µm
mg/kg
10
Volatile matter at 105 °C % 0.1
Electrical conductivity µS/cm not applicable
Density
Bulk density
Tamped density
g/cm³
2.6
0.35
0.70
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
9
60
Hardness silica/kaolinite
mg
7/4.5
Refractive index n 1.55
Water solubility
Acid solubility
%
not applicable
< 1
Chemical Analysis:
SiO2
Al2O3
Fe2O3
%
86
13
< 1
Mineralogical Composition:
Neuburg silica
Calcined kaolinite
%
60
40
Equilibrium moisture content at 25°C
and 50% relative humidity
and 80% relative humidity
and 90% relative humidity
%
0.04
0.06
0.07
Water absorption ml/g ≤ 0.1
hydrophobic X
reactive X

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

more

More recommended Products