Epoxy, aqueous, clear coat
Amino functionalized based on Sillitin Z 86.
Aktisil AM is applicable in epoxy systems, aqueous and clear coats without corrosion protection pigments.
The product offers improvement of the anti-corrosion properties after salt spray test, especially in high concentrations.
- excellent dispersion properties
- good rheological properties
- very low sedimentation
- low abrasivity
- fast drying
- good weathering resistance
- good chemical resistance, especially against acids
- excellent abrasion resistance
- high coating flexibility/cupping
- good corrosion protection, especially reduction of delamination
- potential for reducing the corrosion protection pigment
| Product characteristics | Unit | Testing method | AKTISIL AM |
|---|---|---|---|
| Functionalization | amino | ||
|
Color values L*
Color values a*
Color values b*
|
acc. to CIELAB |
93.8
1.0
9.9
|
|
|
Particle size D50
Particle size D97
|
µm | acc. to ISO 13320-1 |
2.2
10.0
|
|
Residue > 40 µm
|
mg/kg | acc. to DIN EN ISO 787 part 18 |
30
|
| Volatile matter at 105 °C | % | acc. to DIN EN ISO 787 part 2 | 0.2 |
|
Density
Bulk density
|
g/cm³ |
acc. to DIN EN ISO 787 part 10
acc. to DIN ISO 903-1976
|
2.6
0.32
|
|
Spec. Surface area (BET)
Oil absorption
|
m²/g
g/100 g
|
acc. to DIN ISO 9277
acc. to DIN EN ISO 787 part 5
|
9
45
|
| Water absorption | ml/g | acc. to Baumann | not specified |
| reactive | X |
In order to make available to you the most important information about our products at all times, you will find here the Material Specification.
The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.
All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.