Javasript is currently not supported/disabled by this browser. Please enable JavaScript for full functionality.

Corrosion protection coatings

excellent dispersion properties

good rheological properties

very low sedimentation

low abrasivity

fast drying

good weathering resistance

good corrosion protection

good chemical resistance, especially against acids

excellent abrasion resistance

potential for reducing the corrosion protection pigment

Anti-corrosion coating, polyaspartic, very high solid, VOC approx. 145 g/l (R24404.1)

Heat resistant anti-corrosion paint up to 400°C, solvent-based, black, for industrial installations, chimneys and exhaust pipings (R21402.0 [1])

Rust converter, water-based, primer for corroded steel (R10102.2 [23])

Anti-corrosion primer for high requirements, high solid (407-04)

Universal anti-corrosion primer, water-based, white (RRS 2145)

Anti-corrosion primer, medium solid, VOC approx. 430 g/l (R24301.1)

Rust inhibitive primer, water-based (R10103.2 [2])

Anti-corrosion 2K epoxy clear coat, water-based, improved blushing resistance (L00001.1)

Anti-corrosion primer for sandblasted steel, water-based (RRS 2176)

Anti-corrosion primer for high requirements, very high solid, VOC 250 g/l (R24403 A)

Heat resistant anti-corrosion paint up to 650°C, water-based, black (R11402.0 [1])

Anti-corrosion coating, water-based, white, single-layer system, direct-to-metal (DTM) (L00012.1)

Anti-corrosion coating, water-based, black, single-layer system, direct-to-metal (DTM) (L00035.1)

Anti-corrosion primer for high requirements, very high solid, VOC 250 g/l, good acid resistance (R24403 C)

Rust inhibitive primer, water-based, red (R11403.0 [1])

Anti-corrosion primer, water-based, red, good wet adhesion, for economic use (L00014.2 [3])

Anti-corrosion primer for high requirements, very high solid, VOC 250 g/l, good acid resistance, for non-sagging thick film applications (R24403 D)

Heat resistant anti-corrosion paint up to 650°C, solvent-based, black, for industrial installations, chimneys and exhaust pipings (R21401.0 [1])

Anti-corrosion 2K epoxy monocoat, water-based, black, without active pigments, only Heucorin FR (OT 2265/01)

Anti-corrosion 2K epoxy primer, water-based, gray, general industry, high requirements to corrosion protection (NC2260DIN12944-6)

2K Epoxy primer surfacer, water-based, yellow, good sandability, anti-corrosion, e.g. for trains (L00046.1)

Anti-corrosion 2K epoxy primer, water-based, gray, Deutsche Bahn, high requirements to corrosion protection (NC2260DB)

Download all

technical-report

Recommended Products

Name	Short Description
SILLITIN V 85	Low viscosity, high gloss in polyaspartic systems.
SILLITIN Z 86	Shear thinning, good and well-balanced results in the salt spray test and humidity test.
SILLITIN Z 89	Same as Sillitin Z 86, but more neutral in color, for brighter coatings.
AKTISIL PF 777	Strongly shear thinning, very good adhesive strength and good humidity test results also on non-blasted steel, good chemical resistance.
AKTIFIT PF 111	Similar to Aktisil PF 777, but with highest brightness and color neutrality, more easily dispersible, better leveling.

Name	Short Description
SILLITIN Z 86	Standard product.
AKTISIL AM	Good leveling, good corrosion protection even with reduced zinc phosphate concentrations, on non-blasted steel very good results, good chemical resistance.
AKTISIL PF 777	Strongly shear thinning, high sag resistance, good corrosion protection, good adhesion even with reduced zinc phosphate concentrations, good chemical resistance.
AKTIFIT PF 111	Similar to Aktisil PF 777, but with highest brightness and color neutrality, more easily dispersible, better leveling.

Name	Short Description
SILLITIN Z 89	Reduction of milky-white blushing, improvement of delamination after salt spray test.
SILFIT Z 91	The product is not available at the moment. We offer suitable possibilities, please contact us.
AKTISIL AM	Improvement of the anti-corrosion properties after salt spray test.

Name	Short Description
SILLITIN Z 89	Standard product with focus on costs, good adhesion and corrosion properties.
AKTIFIT Q	Similar to Sillitin Z 89, but brighter, highest color neutrality, hydrophobic, best barrier properties, long term of protection.

Name	Short Description
AKTISIL AM	Storage stable filler pastes without sedimentation, good adhesion, reduction of delamination at the scribe, best results with corrosion inhibitors without anti-corrosion pigments.

Name	Short Description
AKTIFIT PF 111	Good leveling, good adhesion at non-blasted steel, low water absorption, high resistance to blistering.
AKTIFIT PF 115	Similar to Aktifit PF 111 but higher wet and intercoat adhesion, better salt spray resistance, efficient in application with low film thickness and single layer.