Aktifit PF 111 in moisture-curing adhesives

STP-E / STP-U

Calcined product, alkyl functionalized.

Aktifit PF 111 is applicable in STP-E and STP-U adhesives.
The product offers high rheological activity (higher viscosity at low shear rates, yield point, greater shear thinning) with high tensile and lap shear strength. as well as highest tear resistant in STP-U.

 

  • selectable rheology (free-flowing to non-sagging)
  • excellent strength of properties, up to 2-fold or 3-fold calcium carbonate (tensile strength and lap shear strength), mostly without reducing the ultimate elongation
  • good water resistance and chemical resistance
Product characteristics Unit AKTIFIT PF 111
Functionalization alkyl
Color values L*
Color values a*
Color values b*
96.2
- 0.1
1.0
Particle size D50
Particle size D97
µm
2.0
10.0
Residue > 40 µm
mg/kg
10
Volatile matter at 105 °C % 0.2
Electrical conductivity µS/cm not applicable
pH Value not applicable
Density
Bulk density
Tamped density
g/cm³
2.6
0.30
0.60
Spec. Surface area (BET)
Oil absorption
m²/g
g/100 g
9
60
Hardness silica/kaolinite
mg
7/4.5
Refractive index n 1.55
Water solubility
Acid solubility
%
not applicable
not applicable
Chemical Analysis:
SiO2
Al2O3
Fe2O3
%
86
13
< 1
Mineralogical Composition:
Neuburg silica
Calcined kaolinite
%
60
40
Equilibrium moisture content at 25°C
and 50% relative humidity
and 80% relative humidity
and 90% relative humidity
%
0.07
0.10
0.13
Water absorption ml/g ? 0.1
hydrophobic X

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

more

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

more

More recommended Products