Aktisil VM 56 in FKM-Compounds

Peroxide

Vinyl functionalized based on Sillitin Z 86.

Aktifit VM offers highest tensile strength, lowest compression set acc. to VW, best abrasion resistance, best heat resistance and improved resistance to acetic acid.

very low sieve residue

good mixing and dispersion properties

high tensile strength

high abrasion resistance

long flow time with short vulcanization time

easy deflashing

low compression set

good resistance to substances (fuel, oil, water, acid)

avoidance of mold fouling caused on dies caused by filler

Product characteristics	Unit	Testing method	AKTISIL VM 56
Functionalization			vinyl
Color values L* Color values a* Color values b*		acc. to CIELAB	94.0 1.0 10.0
Particle size D₅₀ Particle size D₉₇	µm	acc. to ISO 13320-1	2.4 12.0
Residue > 40 µm	mg/kg	acc. to DIN EN ISO 787 part 18	15
Volatile matter at 105 °C	%	acc. to DIN EN ISO 787 part 2	0.5
Density Bulk density	g/cm³	acc. to DIN EN ISO 787 part 10 acc. to DIN ISO 903-1976	2.6 0.25
Spec. Surface area (BET) Oil absorption	m²/g g/100 g	acc. to DIN ISO 9277 acc. to DIN EN ISO 787 part 5	9 45
Water absorption	ml/g	acc. to Baumann	not specified
reactive			X

Material Specification

In order to make available to you the most important information about our products at all times, you will find here the Material Specification.

The aspects to observe when working with our products are detailed in our Material Safety Data Sheet, which also can be downloaded.

All information about material characteristics, application fields and benefits can be found in this Technical Data Sheet and is also for download available here.

More recommended Products

Sorted by crosslinking agent.

Bisphenol
Peroxide

Name	Short Description
SILLITIN V 85	Standard product with highest elongation at break, highest tear resistance, lowest compression set, well-balanced media restistance.
AKTISIL Q	Similar to Sillitin V 85, but with higher tear resistance, higher modulus.
AKTISIL AM	Similar to Aktisil Q, but with highest tensile strength and modulus, best heat and water resistance.

Name	Short Description
SILLITIN Z 86	Standard product with highest elongation at break, well-balanced media resitance.
SILLITIN V 88	Similar to Sillitin Z 86, along with highest tear resistance.
AKTISIL AM	Similar to Sillitin Z 86, but with fastest cure speed, higher tensile strength, highest modulus, lowest compression set acc. VW, improved abrasion resistance, improved resistance to heat and acetic acid.
AKTISIL Q	Similar to Sillitin V 88, but with faster cure speed, higher modulus, lower compression set acc. to ISO, slightly improved abrasion resistance, best resistance to acetic acid, best oil resistance.