Construction Industry
Building profiles (window and façade sealings)
Advantages
- low to very low moisture content
- enables high loading of filler and plasticizer
- excellent extrusion properties
- high surface quality
- high tensile modulus
- low compression set
- avoids deposits on dies caused by filler
Recommended Products
Guide Formulations
| Building profile, gray, start formulation RAL GZ 716/1 B/II, moderate gray scale change after artificial weathering; 65 Shore A; EPDM; peroxide cure (M 586.3/19) | |
| Building profile, gray, start formulation RAL GZ 716/1 B/II, moderate gray scale change after artificial weathering; 65 Shore A; EPDM; peroxide cure (M 586.3/28) | |
| Building profile, gray, start formulation RAL GZ 716/1 B/II, moderate gray scale change after artificial weathering; 65 Shore A; EPDM; peroxide cure (M 586.3 A) | |
| Building profile, gray, start formulation RAL GZ 716/1 B/II, moderate gray scale change after artificial weathering; 65 Shore A; EPDM; peroxide cure (M 586.3 B) | |
| Building profile, gray, start formulation RAL GZ 716/1 B/II, moderate gray scale change after artificial weathering; 65 Shore A; EPDM; peroxide cure (M 586.3 C) | |
| Building profile, start formulation DIN 7863 and RAL GZ 716/1 A/II, replacement of carbon black by Aktisil VM 56; 65 Shore A; EPDM; peroxide cure (M 598.1/11) | |
| Building profile, start formulation DIN 7863 and RAL GZ 716/1 A/II, replacement of carbon black by Aktisil VM 56; 65 Shore A; EPDM; peroxide cure (M 598.1/14) | |
| Building profile, start formulation DIN 7863 and RAL GZ 716/1 A/II, replacement of carbon black by Aktisil VM 56; 65 Shore A; EPDM; peroxide cure (M 598.1/2) | |
| DIN 4060 (1988-12); Density 0.80 g/cm³; EPDM; sulfur cure / UHF cure (V 2155) | |
| Building profile, DIN 7863; 50 Shore A; EPDM; sulfur cure / steam cure (V 5841 B) | |
| Building profile, DIN 7863; 60 Shore A; EPDM; sulfur cure / steam cure (V 5842 B) | |
| Building profile, DIN 7863; 70 Shore A; EPDM; sulfur cure / steam cure (V 5843 B) | |
| Building profile, DIN 7863; 80 Shore A; EPDM; peroxide cure / LCM cure (911 C 157) | |
| Building profile, AFNOR 85301; 60 Shore A; EPDM; sulfur cure / CV cure (891 E 300) | |
| Building profile, AFNOR 85301; 70 Shore A; EPDM; sulfur cure / CV cure (891 E 301) | |
| Building profile, AFNOR 85301; 80 Shore A; EPDM; sulfur cure / CV cure (891 E 302) | |
| Building profile; 75 Shore A; EPDM; sulfur cure / LCM cure (871 E 237) | |
| Building profile, flame retardant halogen free; 80 Shore A; EPDM; sulfur cure / steam cure (911 E 514) | |
| Building profile, flame retardant halogen free; 60 Shore A; EPDM; peroxide cure / steam cure (921 Y 001) | |
| Density 0.40 g/cm³; EPDM; sulfur cure / LCM cure (921 M 051) | |
| Density 0.35 g/cm³; EPDM; peroxide cure / LCM cure (871 M 135) | |
| Density 0.40 g/cm³; EPDM; sulfur cure / LCM cure (RRS 5) | |
| Density 0.60 g/cm³; EPDM; sulfur cure / hot air cure (RRS 7) | |
| Density 0.40 g/cm³; EPDM; sulfur cure / LCM cure (RRS 3) | |
| Density 0.40 g/cm³; EPDM; sulfur cure / LCM cure (RRS 4) | |
| Density 0.35 g/cm³; EPDM; sulfur cure / LCM cure (RRS 2) | |
| Density 0.45 g/cm³; EPDM; peroxide cure / LCM cure (RRS 6) | |
| Building profile; 70 Shore A; EPDM; peroxide cure / LCM cure (M 124) | |
| Building profile; 55 Shore A; EPDM; sulfur cure / LCM or hot air cure (A.1.3.002) | |
| Building profile; 20 Shore A; EPDM; sulfur cure / LCM cure (A.1.3.001) | |
| Density 0.50 g/cm³; EPDM; sulfur cure / LCM cure (A.2.4.001) | |
| Density 0.30 g/cm³; EPDM; sulfur cure / LCM cure (A.2.4.002) | |
| Density 0.35 g/cm³; EPDM; sulfur cure / LCM cure (A.2.4.003) | |
| Building profile; 60 Shore A; EPDM; peroxide cure / LCM cure (RRS 1) | |
| Building profile, white (similar to RAL 9002), start formulation RAL GZ 716/1 B/II and DIN 7863, very good extrudability, excellent compression set; 65 Shore A; EPDM; peroxide cure (M 612.10/4) | |
| Building profile, white (similar to RAL 9002), start formulation RAL GZ 716/1 B/II and DIN 7863, very good extrudability, excellent compression set; 65 Shore A; EPDM; peroxide cure (M 612.10/9) | |
| Building profile, white (similar to RAL 9002), start formulation RAL GZ 716/1 B/II and DIN 7863, very good extrudability, excellent compression set; 65 Shore A; EPDM; peroxide cure (M 612.10/7) | |
| Building profile, white (similar to RAL 9002), start formulation RAL GZ 716/1 B/II and DIN 7863, very good extrudability, excellent compression set; 65 Shore A; EPDM; peroxide cure (M 612.10/2) | |