Automotive
EPDM profiles, cellular
Advantages
- good mixing and dispersion properties
- good extrusions properties
- high surface quality
- high electrical resistance
- cost reduction potential
- avoid deposits on dies caused by filler
- lower water absorption (compared with carbon black)
Recommended Products
soft, chemically foamed | Sillitin N 75 | Sillitin Z 86 | Sillitin P 87 | Aktisil PF 216 | Aktifit PF 1151) |
|---|---|---|---|---|---|
| Profile quality/extrusion speed | |||||
| Plating/Mold fouling | no | ||||
| Wear | |||||
| Tensile strength | |||||
| Moduli | |||||
| Compression set | |||||
| To product | To product | To product | To product | To product |
1) less moisture than Sillitin/Aktisil
low
high
Optimum
hard, physically foamed | Sillitin N 75 | Sillitin Z 86 | Aktisil PF 216 | Aktisil AM |
|---|---|---|---|---|
| Profile quality/extrusion speed | ||||
| Plating/Mold fouling | ||||
| Wear | ||||
| Tensile strength | ||||
| Moduli | ||||
| Compression set | ||||
| To product | To product | To product | To product |
low
high
Optimum
Documents
Document | Download |
|---|---|
| Technical Data Sheet | |
| TDS Elastomers - Sillitin N 75 | |
| TDS Elastomers - Sillitin Z 86 / Z 86 puriss | |
| TDS Elastomers - Sillitin P 87 / P 87 puriss | |
| TDS Elastomers - Silfit Z 91 | |
| TDS Elastomers - Aktisil PF 216 | |
| TDS Elastomers - Aktifit PF 115 | |
| TDS Elastomers - Aktisil AM | |
| Technical Poster | |
| Partial replacement of carbon black with Neuburg Siliceous Earth in cellular EPDM profile compounds | |
| Partial replacement of carbon black with Neuburg Siliceous Earth in cellular, hard EPDM cpds. for weight and cost savings | |
| Technical Report | |
| Partial replacement of carbon black with Neuburg Siliceous Earth in cellular, hard EPDM compounds for weight and cost savings | |
| Partial replacement of carbon black with Neuburg Siliceous Earth in cellular EPDM profile compounds | |
Guide Formulations
| Expanded parts of snap-on profile for bonnet and trunkseals, good collapse resistance; Density 0.60 g/cm³; EPDM; sulfur cure / UHF cure (V 2658) | |
| Profile; Density 0.30 g/cm³; EPDM; sulfur cure / LCM cure (A.2.0.001) | |
| Profile; Density 0.30 g/cm³; EPDM; sulfur cure / LCM cure (A.2.0.002) | |
| Door seal tube; Density 0.55 g/cm³; EPDM; sulfur cure / LCM cure (M 704) | |
| Door seal tube; Density 0.55 g/cm³; EPDM; sulfur cure / LCM cure (M 701) | |
| Smooth skin, excellent load deflection; Density 0.50 g/cm³; EPDM; sulfur cure / UHF cure (S 8943) | |
| Sponge profile, electrically conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/1) | |
| Sponge profile, electrically conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/2) | |
| Sponge profile, electrically conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/3) | |
| Sponge profile, electrically conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/4) | |
| Sponge profile, electrically conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/6) | |
| Sponge profile, electrically conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/7) | |
| Sponge profile, electrically non-conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/9) | |
| Sponge profile, electrically non-conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/10) | |
| Sponge profile, electrically non-conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/11) | |
| Sponge profile, electrically non-conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/13) | |
| Sponge profile, electrically non-conductive, partial carbon black replacement; Density 0.50 g/cm³; EPDM; sulfur cure / CV cure (M 665.4/14) | |
| Profile, cellular, hard, electrically conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/1) | |
| Profile, cellular, hard, electrically conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/11) | |
| Profile, cellular, hard, electrically conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/12) | |
| Profile, cellular, hard, electrically conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/14) | |
| Profile, cellular, hard, electrically conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/15) | |
| Profile, cellular, hard, electrically non-conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/2) | |
| Profile, cellular, hard, electrically non-conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/3) | |
| Profile, cellular, hard, electrically non-conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/5) | |
| Profile, cellular, hard, electrically non-conductive, partial carbon black replacement for weight and cost savings; 60 Shore A; Density 0.70 g/cm³; EPDM; sulfur cure / CV cure (M 680.4/6) | |