Machine and equipment construction
Roller coverings and printing blankets
Advantages
- very low residue > 40 µm
- good mixing and dispersion properties
- good rubber-metal adhesive strength
- excellent grinding properties
- high surface quality
- good for laser engraving
- low dynamic heat build-up
- low compression set
- good resistance against solvents, oil, water, acid
- avoidance of mold fouling caused by filler
Recommended Products
Sillitin N 85 | Sillitin N 85 puriss | Sillitin Z 86 | Sillitin Z 86 puriss | Silfit Z 911) | |
|---|---|---|---|---|---|
| Dispersibility | |||||
| Wear | |||||
| Plating/Mold fouling | no | ||||
| Brightness | |||||
| Color neutrality | |||||
| To product | To product | To product | To product | To product |
1) less moisture than Sillitin
low
high
Optimum
Specially for sulphur and metaloxide crosslinking | Aktisil PF 216 | Aktisil AM | Aktifit AM1) |
|---|---|---|---|
| Cure rate | |||
| Tensile strength | |||
| Moduli | |||
| Compression set | |||
| Abrasion resistance | |||
| Chemical resistance | |||
| Dynamic heat build-up | |||
| To product | To product | To product |
1) less moisture than Aktisil
low
high
Optimum
Specially for diamine crosslinking | Aktisil AM | Aktifit AM1) |
|---|---|---|
| Dispersibility | ||
| Tensile strength | ||
| Moduli | ||
| Compression set | ||
| Abrasion resistance | ||
| Chemical resistance | ||
| Dynamic heat build-up | ||
| To product | To product |
1) less moisture than Aktisil
low
high
Optimum
Specially for peroxide crosslinking | Aktisil VM 56 | Aktisil VM 56/89 | Aktisil Q1) | Aktifit VM2) | Aktifit Q2) |
|---|---|---|---|---|---|
| Dispersibility | |||||
| Color neutrality | |||||
| Tensile strength | |||||
| Moduli | |||||
| Compression set | |||||
| Abrasion resistance | |||||
| Chemical resistance | |||||
| Dynamic heat build-up | |||||
| To product | To product | To product | To product | To product |
1) lower viscosity; best product for silicone rubber
2) less moisture
low
high
Optimum
Documents
Document | Download |
|---|---|
| Technical Data Sheet | |
| TDS Elastomers - Sillitin N 85 / N 85 puriss | |
| TDS Elastomers - Sillitin Z 86 / Z 86 puriss | |
| TDS Elastomers - Silfit Z 91 | |
| TDS Elastomers - Aktisil PF 216 | |
| TDS Elastomers - Aktifit AM | |
| TDS Elastomers - Aktisil VM 56 | |
| TDS Elastomers - Aktisil VM 56/89 | |
| TDS Elastomers - Aktisil Q | |
| TDS Elastomers - Aktifit VM | |
| TDS Elastomers - Aktifit Q | |
Guide Formulations
| Rice husking roller; 50 Shore D (97 Shore A); SBR/BR; sulfur cure (M 511.2/14) | |
| Paper press with high heat conductivity; 90 Shore A; NR; sulfur cure (RRS 27) | |
| Replacement for stone rollers with high heat conductivity; 40 Shore D; SBR/NR; sulfur cure (RRS 28) | |
| Resistant to animal fat, colophonic acid and offset print colors; 30 Shore A; PNR; sulfur cure (RRS 44) | |
| Resistant to animal fat, colophonic acid and offset print colors; 40 Shore A; PNR; sulfur cure (RRS 45) | |
| 20 Shore A; PNR; sulfur cure (RRS 17) | |
| 60 Shore A; EPDM; sulfur cure (RRS 22) | |
| 60 Shore A; EPDM; sulfur cure (RRS 23) | |
| 80 Shore A; EPDM; sulfur cure (RRS 24) | |
| 80 Shore A; EPDM; sulfur cure (RRS 25) | |
| 25/30 Shore A; EPDM; sulfur cure (3118 B15) | |
| 25/30 Shore A; EPDM; sulfur cure (3118 B16) | |
| Antistatic; 55 Shore A; NR/BR; sulfur cure (2828) | |
| 45 Shore A; EPDM; sulfur cure (RRS 21) | |
| Oil resistant; 80 Shore A; NBR; sulfur cure (RRS 26) | |
| 80 Shore A; NR; sulfur cure (AT11/19) | |